Sharp XL-S10 XL-S10 Operation Manual - Page 19

Listening to the memorized station " Memorizing a station You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) 1 Perform steps 1 - 3 in "Listening to the radio" on page 18. 2 Press the MEMORY/SET (MEMORY) button to enter the preset tuning saving mode. 3 Within 5 seconds, press the PRESET ( or ) button to select the preset channel number. Store the stations in memory, in order, starting with preset channel 1. 4 Within 5 seconds, press the MEMORY/SET (MEMORY) button to store that station in memory. If the "MEMORY" and preset number indicators go out before the station is memorized, repeat the operation from step 2. 5 Repeat steps 1 - 4 to set other stations, or to change a pre- set station. When a new station is stored in memory, the station previously memorized will be erased. Note: The backup function protects the memorized stations for a few hours should there be a power failure or the AC power cord get disconnected. " To recall a memorized station Press the PRESET ( or ) button for less than 0.5 seconds to select the desired station. Preset channel Frequency and frequency band " To scan the preset stations The stations saved in memory can be scanned automatically. (Preset memory scan) 1 Press the PRESET ( or ) button for more than 0.5 sec- onds. The preset number will flash and the programmed stations will be tuned in sequentially, for 5 seconds each. 2 Press the PRESET ( or ) button again when the desired station is located. " To clear a memorized station 1 Recall the memorized station. 2 While it is displayed, press the MEMO- RY/SET (MEMORY) button. 3 Within 5 seconds, press the CLEAR but- ton on the remote control. Radio XL-S10 19