Sharp XL-S10 XL-S10 Operation Manual - Page 27

Troubleshooting chart Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorized SHARP dealer or service center. " General Symptom Possible cause The clock is not set ! Did a power failure occur? Reset the clock to the correct time. (refer to page 13). When a button is pressed, the unit does not respond. ! Set this unit to the power stand-by mode and then turn it back on. ! If the unit still malfunctions, reset it. (Refer to page 28.) No sound is heard. ! Is the volume level set to "0"? ! Are the headphones connected? ! Are the speaker wires disconnected? " CD player Playback does not ! Is the disc loaded upside down? start. Playback stops in the middle or is not performed properly. ! Does the disc satisfy the standards? ! Is the disc distorted or scratched? Playback sounds ! Is the unit located near excessive vibra- are skipped, or tions? stopped in the middle of a track. ! Is the disc very dirty? ! Has condensation formed inside the unit? " Tuner The radio makes un- ! Is the unit placed near the TV or comput- usual noises contin- er? uously. ! Is the FM/AM loop antenna placed prop- erly? Move the antenna away from the AC power cord if located nearby. " Cassette deck Cannot record. ! Is the erase-prevention tab removed? Cannot record tracks ! Is it a normal tape? (You cannot record on with proper sound a metal or CrO tape.) quality. Cannot erase completely. Sound skipping. ! Is there any slack? Cannot hear treble. ! Is the tape stretched? Sound fluctuation. ! Are the capstan, pinch roller, or heads dirty? " Remote control The remote control ! Is the AC power cord of the unit plugged does not operate. in? ! Is the battery polarity correct? ! Are the batteries dead? ! Is the distance or angle incorrect? ! Does the remote control sensor receive strong light? References XL-S10 27