Singer 1 One Instruction Manual 34 - Page 12
thread, overlock, overedge
![]() |
View all Singer 1 One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
6. How to sew two-thread overlock and overedge The 2-thread overlock and overedge is sewn with one needle, one looper and a spreader. (1) Convert right looper into spreader The right looper used in this machine can be easily converted into spreader. • Spreader Horn 1. Remove right looper thread. (Orange thread path) 2. With the small screwdriver, turn spreader conversion screw clockwise as far as it will easily turn. Do not over turn. The right looper will now serve as a spreader. Spreader conversion screw • Converting spreader back to right looper 0 0 1. With the small screwdriver, turn spreader conversion screw counterclockwise as far as it will easily turn. Do not over turn. The right looper will now serve its purpose of looper. 2. Thread the right looper. 0 Note: When left looper thread breaks or when changing the thread, be sure to pass the left looper thread through the inner side of the needle thread as shown. If it is difficult to thread the left looper Left looper in the manner described above, cut the needle thread thread and rethread left looper first and then the needle to avoid erroneous threading. Needle thread 10
![](/manual_guide/products/singer-1-instruction-manual-34-2a046ab/12.png)