Singer 1 One Instruction Manual 34 - Page 4

1. Selection of stitches This machine is capable of praducing various types of stitches according to the combination of needle positions, threading methods, tension adjustment and the use of convertible right looper/spreader. Stitch Type 0 Two-Thread Wrapped Edge Overlock © Two-Thread Overedge 0 Three-Thread Overlock ® Three-Thread Flatlock 0 Three-Thread Wrapped Edge Overlock © Three-Thread Ultra-Stretch Mock Safety Stitch if f _.., IA\ ft ' \r4' - , Reference Pages 1-needle 2-thread stitch is used for 10 seaming lightweight or stretch fabrics. 11 Also ideal for rolled hemming. Also, 12 a 3.5mm and 5.7mm overlock seam 13 width can be obtained by changing the needle position.* 1-needle 2-thread stitch is used for 10 overedging common fabrics. It is also 11 ideal for flatlock (butted or lapped) 12 seams and blind hemming. Also, a 14 3.5mm and 5.7mm overedge seam width can be obtained by changing the needle position.* 1-needle 3-thread stitch is used for 15 overedging and seaming on common 16 fabrics. Also, a 3.5mm and 5.7mm overlock seam width can be obtained by changing the needle position.* ,/• \ 46_ ly,,, r / A, 1-needle 3-thread stitch is used for 15 butted or lapped seams and ornamental 17 stitching with decorative thread. Also, a 3.5mm and 5.7mm flatlock width can be obtained by changing the needle position.* 1-needle 3-thread stitch is used for 15 sewing narrow rolled hems or 18 ornamental edges. Also, a 3.5mm and 5.7mm wrapped overlock seam width can be obtained by changing the needle position.* • 2-needle 3-thread stitch which is 19 ideal for lightweight, extremely \ stretchy fabrics such as tricot and spandex. 2