Singer 7258 Stylist Instruction Manual - Page 12
Spool Pins, Presser Foot Lifter, Darning Plate
View all Singer 7258 Stylist manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
SPOOL PINS HORIZONTAL SPOOL PIN Place thread spool on the pin and secure with a spool cap to ensure smooth flow of thread. If the thread spool has a thread retaining slit, it should be placed to the right. Select the correct spool pin cap according to the type and diameter of spool being used. The diameter of the spool pin cap should always be larger than that of the spool itself. Spool Bobine Carrete Spool pin felt discs Rondelle feutre Disco del pasador carrete Vertical spool pin Porte-bobine vertical Pasador de carrete vertical Thread retaining slot Fente de retenue de fil Ranura de retención de hilo VERTICAL SPOOL PIN Attach the spool pin and place a felt disc over it. Place a spool of thread on the spool pin. Spool pin cap Couvre-fil Tapa del pasador carrete Spool Bobine Carrete Spool pin Porte-bobine Pasador carrete PRESSER FOOT LIFTER There are three positions for your presser foot. 1. Lower the presser foot to sew. 2. Raise the lifter to the middle position to insert or remove fabric, and to change presser foot. 3. Lift it to its highest position to accommodate thicker fabrics. DARNING PLATE Use the darning plate when you need to control fabric feeding for button sewing, free motion work and free motion darning. Raise needle and presser foot, and position darning plate onto the needle plate with the two pins on the back inserted to the holes of needle plate. 12