Snapper 200Z Operater's Manual - Page 14

Operation - battery

Get Snapper 200Z PDF manuals and user guides View all Snapper 200Z manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

Operation Ignition Switch The ignition switch starts and stops the engine; it has three positions: OFF Stops the engine and shuts off the electrical system. RUN Allows the engine to run and powers the electrical system. START Cranks the engine for starting. NOTE: Never leave the ignition switch in the RUN position with the engine stopped-this drains the battery. Fuel Tank Cap To remove the cap, turn counterclockwise. Mower Cutting Height Adjustment Switch The mower cutting height is adjustable between 1-1/2" (3,8 cm) and 3-3/4" (9,5 cm). See Cutting Height Adjustment. Parking Brake Moving the parking brake lever forward and to the right engages the parking brake. Moving the lever to the left and back disengages the brake. PTO Switch The PTO (Power Take-Off) switch engages and disengages the mower blade clutch. To engage the PTO, pull UP on the switch. Push DOWN to disengage. Note that the operator must be seated firmly in the rider seat for the PTO to function. Transmission Release Levers r n The transmission release levers deactivate the transmissions so that the unit can be pushed by hand fo tio (see Pushing the Unit by Hand). t Seat Adjustment Lever c The seat can be adjusted forward and backward RNeoprodu (see Seat Adjustments). 14 www.Snapper.com

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
14
www.Snapper.com
Operation
Ignition Switch
The ignition switch starts and stops the engine; it
has three positions:
OFF
Stops the engine and shuts off the
electrical system.
RUN
Allows the engine to run and powers the
electrical system.
START
Cranks the engine for starting.
NOTE:
Never leave the ignition switch in the RUN posi-
tion with the engine stopped–this drains the battery.
PTO Switch
The PTO (Power Take-Off) switch engages and
disengages the mower blade clutch. To engage the PTO,
pull UP on the switch. Push DOWN to disengage. Note
that the operator must be seated firmly in the rider seat
for the PTO to function.
Transmission Release Levers
The transmission release levers deactivate the
transmissions so that the unit can be pushed by hand
(see
Pushing the Unit by Hand
).
Seat Adjustment Lever
The seat can be adjusted forward and backward
(see
Seat Adjustments).
Fuel Tank Cap
To remove the cap, turn counterclockwise.
Mower Cutting Height Adjustment
Switch
The mower cutting height is adjustable between 1-1/2”
(3,8 cm) and 3-3/4” (9,5 cm). See
Cutting Height
Adjustment
.
Parking Brake
Moving the parking brake lever forward and to the
right engages the parking brake. Moving the lever to the
left and back disengages the brake.
Not for
Reproduction