Snapper SPX2042 Operation Manual - Page 18
Adjusting the Mower Cutting Height, Cruise Control, Parking Brake, Stopping the Tractor and Engine
View all Snapper SPX2042 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Adjusting the Mower Cutting Height Use the mower cutting height adjustment lever to raise or lower the cutting height (see Features and Controls). The cutting height has seven positions between 1.5" and 4.0" (3,8 and 10,2 cm). Stopping the Tractor and Engine WARNING Fuel and its vapors are extremely flammable and explosive. Fire or explosion can cause severe burns or death. Parking Brake • Do not choke the carburetor to stop the engine. Use the parking brake control to engage or disengage the parking brake when the tractor is stopped (Features and Controls). Engage the Parking Brake - To engage the parking brake, fully depress the brake pedal, pull UP on the parking brake control, and release the brake pedal. Disengage the Parking Brake - To disengage the parking brake, fully depress the brake pedal, press DOWN on the parking brake control, and release the brake pedal. 1. Release the ground speed pedals to return to the NEUTRAL position (see Features and Controls). 2. While still on the lawn, disengage the PTO switch, then wait for all moving parts to stop. 3. Move the throttle/choke control to the SLOW position and turn the ignition key to OFF. Remove the key. 4. Engage the parking brake. Fully depress the brake pedal, pull UP on the parking brake control, and release the brake pedal. Cruise Control To engage: 1. Depress the forward ground speed pedal (see Features n and Controls). tio 2. Pull up the cruise control when the desired speed is reached. The cruise will lock in one of its five locking positions. r c To disengage: fo u 1. Depress the brake pedal. t d or NoRepro 2. Depress the forward ground speed pedal. NOTE: In the event of an emergency, the engine can be stopped by turning the ignition switch to STOP. 18