Sonos Controller for Android User Guide - Page 39

Chapter 4: Managing and Playing Music 4-17 Select the Sonos component this device is connected to, and then touch Line-In. • Line-In Source Name: Select a component name from the list. • Line-In Source Level: A default (typical) line-in source level is automatically assigned based upon the source name. (If the volume sounds too low, you can select a higher line level. You may experience clipping at higher volume levels if you set the level too high.) • Autoplay Zone: Select the room you want your line-in source to play in whenever it's connected to Sonos. You can also select Include Grouped Zones so that any rooms grouped with the autoplay zone will play the same music. • Autoplay Volume. Use the slider to set the default volume for the autoplay zone when the line-in source is connected. Select Use Autoplay Volume if you intend to use your line-in device to adjust the volume in the autoplay zone. Line-out You can easily connect your home theater, stereo, or powered speakers to a CONNECT. Depending on the model, you can use analog or digital audio outputs to connect to an external amplifier. The SONOS CONNECT has both digital and analog outputs, while the ZonePlayer 100 has analog outputs. The SONOS CONNECT:AMP is not designed with audio outputs. For instructions on connecting a device, see the documentation included with your Sonos component. Also, go to http://faq.sonos.com/lineout. For additional information on connecting audio devices, go to our Web site at http://faq.sonos.com/cables. Controlling the volume from your home theater Set the line-out level on this Sonos component to Fixed: • From the Settings menu, select ZonePlayer Settings. Touch to select the Sonos component attached to your home theater, select Line-Out Level, and choose Fixed. Note: When the line-out level on your Sonos component is Fixed, you cannot adjust the volume or the equalization settings using your Sonos controller. Controlling the volume from your Sonos system 1. Adjust your home theater or other audio device's volume to typical listening volume. 2. Select ZonePlayer Settings from the Settings menu. Touch to select the Sonos component attached to your home theater, select Line-Out Level, and choose Variable. 3. Adjust the volume on your Sonos system so you can hear music. This may be at the high end of the volume scale. 4. If desired, you can readjust the volume on your home theater system so that the volume range for the controller falls within your typical listening range.