Sony BDP-S350 Operating Instructions - Page 29

Select Finish, and press ENTER., Set the Control for HDMI function - reset

Page 29 highlights

Hookups and Settings b If the picture is distorted or no picture appears, wait for about 30 seconds without pressing any buttons. The display returns to the resolution setting screen. If the selected video output resolution is incorrect, no picture appears on the screen when you press any button in 30 seconds. In this case, press x on the player for more than 10 seconds to reset the video output resolution to the lowest resolution. To change the video output resolution, set "Output Video Format" in the "Video Settings" setup (page 42). 8 Select an aspect ratio that matches your TV, and press ENTER. 10 Select "Finish," and press ENTER. z • You can reset settings to their factory settings (page 52). • You can run "Easy Setup" again from "Easy Setup" in "Setup" (page 52). Select "16:9" when connecting to a widescreen TV or a TV with a wide mode function. Select "4:3" when connecting to a 4:3 screen TV without a wide mode function. 9 (Only when connecting your TV using the HDMI cable) Set the "Control for HDMI" function to "On" or "Off," and press ENTER. Select "On" to use the "Control for HDMI" function when connecting Sony components that are compatible with the "Control for HDMI" function (page 16). If you do not use the "Control for HDMI" function, select "Off." 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79

29
Hookups and Settings
b
If the picture is distorted or no picture appears,
wait for about 30 seconds without pressing any
buttons. The display returns to the resolution
setting screen.
If the selected video output resolution is
incorrect, no picture appears on the screen
when you press any button in 30 seconds. In
this case, press
x
on the player for more than
10 seconds to reset the video output resolution
to the lowest resolution. To change the video
output resolution, set “Output Video Format”
in the “Video Settings” setup (page 42).
8
Select an aspect ratio that matches
your TV, and press ENTER.
Select “16:9” when connecting to a wide-
screen TV or a TV with a wide mode
function.
Select “4:3” when connecting to a 4:3
screen TV without a wide mode function.
9
(Only when connecting your TV using
the HDMI cable)
Set the “Control for HDMI” function to
“On” or “Off,” and press ENTER.
Select “On” to use the “Control for
HDMI” function when connecting Sony
components that are compatible with the
“Control for HDMI” function (page 16).
If you do not use the “Control for HDMI”
function, select “Off.”
10
Select “Finish,” and press ENTER.
z
You can reset settings to their factory settings
(page 52).
You can run “Easy Setup” again from “Easy
Setup” in “Setup” (page 52).