Sony BDP-S350 Operating Instructions - Page 62

Audio Output Signals The audio output differs as follows, depending on the source, output jack, and the selected settings. Jacks/ Digital settings*1 HDMI OUT jack*2 Disc/source Auto*3 2ch PCM*3 BD LPCM 2ch LPCM 2ch LPCM 2ch LPCM 5.1ch LPCM 5.1ch LPCM 2ch LPCM 7.1ch LPCM 7.1ch LPCM 2ch Dolby Digital LPCM 5.1ch*5 LPCM 2ch Dolby Digital Plus LPCM 7.1ch*5 LPCM 2ch Dolby TrueHD LPCM 7.1ch*5 LPCM 2ch DTS LPCM 5.1ch*5 LPCM 2ch DTS-HD High Resolution Audio LPCM 5.1ch*5 (DTS core) LPCM 2ch DTS-HD Master Audio LPCM 5.1ch*5 (DTS core) LPCM 2ch DVD LPCM LPCM 2ch LPCM 2ch Dolby Digital Dolby Digital LPCM 2ch DTS DTS LPCM 2ch CD LPCM LPCM LPCM 2ch DTS 5.1 MUSIC DISC DTS LPCM 2ch DIGITAL OUT (OPTICAL/ COAXIAL) jacks*2 Bitstream*4 PCM LPCM 2ch LPCM 2ch LPCM 2ch LPCM 2ch LPCM 2ch LPCM 2ch Dolby Digital/ LPCM 2ch*6 LPCM 2ch Dolby Digital/ LPCM 2ch*6 LPCM 2ch Dolby Digital/ LPCM 2ch*6 LPCM 2ch DTS/ LPCM 2ch*6 LPCM 2ch DTS/ LPCM 2ch*6 LPCM 2ch DTS/ LPCM 2ch*6 LPCM 2ch Dolby Digital DTS LPCM 2ch DTS LPCM 2ch LPCM 2ch LPCM 2ch LPCM 2ch LPCM 2ch LPCM 2ch Analog LINE OUT (R-AUDIO-L) jacks 2ch 2ch 2ch 2ch 2ch 2ch 2ch 2ch 2ch 2ch 2ch 2ch 2ch 2ch *1 When "Audio Output Priority" is set to "Stereo Analog," LPCM 2ch signals are output from each jack. *2 When "Audio Output Priority" is set to "HDMI" or "Coaxial/Optical," LPCM 2ch signals are output from jacks other than the selected jack. *3 Auto: when "Audio (HDMI)" is set to "Auto" in the "Audio Settings" setup (page 44). 2ch PCM: when "Audio (HDMI)" is set to "2ch PCM" in the "Audio Settings" setup (page 44). *4 Bitstream: when "Dolby Digital" is set to "Dolby Digital" or "DTS" is set to "DTS" in the "Audio Settings" setup (page 44). *5 When "BD Audio Setting" is set to "Direct," audio recorded by the source is output by bitstream. However, this audio may be output as follows depending on the audio formats supported by the AV amplifier (receiver). - When the AV amplifier (receiver) does not support HD Audio (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio) but supports Multi-ch LPCM, up to LPCM 7.1ch is output. - When the AV amplifier (receiver) does not support HD Audio or Multi-ch LPCM but supports Dolby Digital/DTS, a Dolby Digital or DTS bitstream is output. - When the AV amplifier (receiver) does not support HD Audio, Multi-ch LPCM or Dolby Digital/DTS, LPCM 2ch is output. *6 The 2-channel or less-channel primary/ secondary audio signals are output as LPCM 2ch signals. b When outputting 480i/480p video signals from the HDMI OUT jack, Dolby TrueHD and DTS-HD Master Audio are output as LPCM, Dolby Digital, or DTS bitstream signals even if "BD Audio Setting" is set to "Direct" in the "Audio Settings" setup (page 44). 62