Sony BDV-IS1000/C Operating Instructions - Page 111
[Audio Settings
View all Sony BDV-IS1000/C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Settings and Adjustments [Audio Settings] You can make the audio settings. x [BD Audio Setting] Selects whether to mix or not mix interactive audio and secondary audio (commentary) when playing a BD that contains such audio. [Mix]: Outputs the audio obtained by mixing the interactive audio and secondary audio to the primary audio. [Direct]: Outputs the primary audio only. x [Audio DRC] (BD/DVD VIDEO only) You can compress the dynamic range of the sound track. [Audio DRC] is useful for watching movies at low volume late at night. [Auto]: Performs playback at the dynamic range specified by the disc (BD-ROM only). Other discs are played back at the "Standard" level. [Off]: No compression of dynamic range. [Standard]: The system reproduces the sound track with the kind of dynamic range that the recording engineer intended. [Max]: The system compresses dynamic range fully. x [Fs Limit] You can select the upper limit of sampling frequency in the audio signal for full sound adjustment. [On]: Sets to 48kHz. You can operate all of the sound control functions of the system. [Off]: Sets to 192kHz. Note • [Fs Limit] works only for the "BD/DVD," "HDMI1," or "HDMI2" function. • In DTS96/24 format, some sound control functions do not work even if you set to [On]. x [Attenuate - TV] Distortion may occur when you listen to a component connected to the TV jacks. Distortion is not a malfunction and will depend on the component connected. To prevent distortion, reduce the input level on the unit. [On]: Attenuates the input level. The output level is changed. [Off]: Normal input level. x [Attenuate - SAT/CABLE] Distortion may occur when you listen to a component connected to the SAT/CABLE IN jacks. Distortion is not a malfunction and will depend on the component connected. To prevent distortion, reduce the input level on the unit. [On]: Attenuates the input level. The output level is changed. [Off]: Normal input level. x [Speaker Settings] To obtain the best possible surround sound, set the speakers. For details, see "Setting the Speakers" (page 100). x [Auto Calibration] You can calibrate the appropriate settings automatically. For details, see "Calibrating the Appropriate Settings Automatically" (page 98). 111US