Sony BDV-IS1000/C Operating Instructions - Page 123
Additional Information, Picture
View all Sony BDV-IS1000/C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Additional Information Picture Symptom Remedy There is no picture. • The video connecting cords are not connected securely. • The video connecting cords are damaged. • The unit is not connected to the correct TV input jack (page 48). • The video input on the TV is not set so that you can view pictures from the system. • Check the output method on your system (page 48). • Re-connect the connecting cord securely. • The unit is connected to an input device that is not HDCP (High-bandwidth Digital Content Protection) compliant ("HDMI" on the front panel does not light up) (page 48). • When playing a double-layer DVD, the video and audio may be momentarily interrupted at the point where the layers switch. No picture appears when the video output resolution selected in [Output Video Format] is incorrect. • Press and hold H and A on the unit for more than 5 seconds to reset the video output resolution to the lowest resolution. Video signals are not output • Set [Output Video Format] to [Component Video] in [Video Settings] from the jacks, other than from (page 109). the HDMI OUT jack, when connecting the HDMI OUT jack and other video output jacks at the same time. The dark area of the picture is too • Set [Picture Quality Mode] to [Standard] (default) (page 72). dark/the bright area is too bright or unnatural. The picture is not output correctly. • Check the [Output Video Format] settings in [Video Settings] (page 109). Picture noise appears. • The disc is dirty or flawed. • If the picture output from your system goes through your VCR to get to your TV, the copy-protection signal applied to some BD/DVD programs could affect picture quality. If you still experience problems even when you connect your unit directly to your TV, try connecting your unit to the other input jacks (page 48). Even though you set the aspect • The aspect ratio on the disc is fixed. ratio in [TV Type] of [Video Settings], the picture does not fill the TV screen. Color irregularity occurs on the TV screen. • If the speakers are used with a CRT-based TV or projector, install the speakers at least 0.3 meters (1.0 ft) from the TV set. • If the color irregularity persists, turn off the TV set once, then turn it on after 15 to 30 minutes. • If howling occurs, reposition the speakers farther away from the TV set. • Make sure that no magnetic object (magnetic latch on a TV stand, health care device, toy, etc.) is placed near the speakers. 123US