Sony CCD-FX311 Primary User Manual - Page 20
Maintenance, Information
View all Sony CCD-FX311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Editing Now to edit 1 Insert a tape to be recorded Into recording VCR. 2 Slide EDIT on the camcorder to the direction of the arrow. EDIT RE 3 Set the POWER switch of the camcorder to PLAYER, then insert the recorded tape. 4 Play back a tape on the camcorder until you locate the point where you want to start editing, then press H PAUSE to set the camcorder to the playback pause mode. 5 On the recording VCR, locate the recording starting point and set the VCR to the recording pause mode. 6 Press II PAUSE on the camcorder end VCR simultaneously to start editing. Editing more scenes Repeat steps 4 to 6 To pop editing momentarily Press II PAUSE on the recording VCR. To stop editing Press STOP on both VCRs II yell use the DATA SCREEN function The indicators displayed on the TV screen will also be recorded. If you don't want to record these indicators. press DATASCREEN on the Commander. Using of the EDIT switch When you set EDIT to the direction of the antat (EDIT OWL you can heap picture and sound deteriorations resulting from editing to the minkrum. Avoid using the edited tape for multipla generations of editing. After editing. be sure to set tide switch in the opposite direction of the arrow (EDIT OFF). 38 Advanced Camara Operation Chapter 4 Additional Information Maintenance Information Moisture Condensation If the camcorder is brought directly from a cold place to a warm place, moisture may condense inside the camcorder, on the surface of the tape or on the lens. In this condition, the tape may stick to the head drum and be damaged or the unit may not operate correctly To prevent possible damage under these circumstances, the camcorder is furnished with moisture sensors However. take the following procaukons If moisture condenses Inside the unit ;Ii ° ,74\ .',000111 ' filtr Moisture is present inside the camcorder when: • The LE indicator in the viewfinder blinks. When the tape is inserted the A indicator also blinks. • Several beeps sound continuously for live xeonds when the BEEP switch'nset to ON and the tape is inserted. In such cases. no functions except for tape ejection work. Elect the tape, turn on the camcorder and leave It with the cassette holder open for at I hour. The ca corder can be used again it the at indicator does not appear when the power is turned on again. If moisture condenses on the surface of the tape Moisture is present on the surface of the tape when. • The B indicator blinks inside the viewfinder when the tape is inserted and a tape transport button (I,. 44. etc.) is pressed • Several beeps sound continuously for about five seconds when the BEEP switch is sel to ON. In such cases, no functions except for tape ejection work. Elect the tape and let the camcorder and the tape sit for et least 1 hour. The tape can be used again it the t• indicator does not appear when the tape is inseded and a tape transport button is pressed. If moisture condenses on the lens No caution indicators will appear, but the picture becomes dim. Turn off the power end don't use the camcorder for et least 1 hoar. How to prevent moisture condensation When bringing the camcorder from a cold place to a warm place. put the camcorder kr a plastic bag and allow It to adapt to room conditions over • period of time. 1 Be sure to tightly seal the plastic bag containing the camcorder. 2 Remove the bag when the air temperature inside it has reached the temperature surrounding it (alter about one TIDED). 39 Additional Information