Sony DCR-PC109 Camera Operations Guide - Page 36
Recording a still image
View all Sony DCR-PC109 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
3 Slide the POWER switch until the CAMERA-TAPE lamp lights up. Recording a still image Slide the POWER switch while pressing the green button. 4 Press EASY. The EASY lights up in blue. 1 Set the LENS COVER switch to OPEN. 2 Open the LCD panel. 3 Slide the POWER switch repeatedly until the CAMERA-MEM lamp lights up. Easy Handycam operation ON Slide the POWER switch while pressing the green button. 5 Press REC START/STOP. Recording starts. [REC] appears on the LCD screen and the Camera recording lamp lights up. Press REC START/STOP again to stop recording. To turn the power off 1 Slide the POWER switch up to the OFF (CHG) position. 2 Set the LENS COVER switch to CLOSE. To cancel Easy Handycam operation Press EASY again. b Notes • You cannot turn Easy Handycam operation on or off during: - Recording - USB Streaming • During Easy Handycam operation, the following buttons are not available: - LCD BACKLIGHT (p. 21) - BACK LIGHT (p. 38) • During Easy Handycam operation, the settings of the functions that are not displayed on the screen return to their defaults. Previously made settings are restored when you cancel Easy Handycam operation. 4 Press EASY. The EASY lights up in blue. 5 Press and hold PHOTO lightly. You will hear a light beeping sound when the focus and brightness settings are adjusted. Recording does not start at this point. 6 Press PHOTO fully. A shutter sound is heard. When bars of disappear, the image is recorded on the "Memory Stick Duo." To turn the power off 1 Slide the POWER switch up to the OFF (CHG) position. 2 Set the LENS COVER switch to CLOSE. To cancel Easy Handycam operation Press EASY again. 36 Recording