Sony DCR VX2100 Operating Instructions - Page 106
To change the label you have made, If you set the write-protect tab of the tape to lock
![]() |
UPC - 027242639812
View all Sony DCR VX2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Labeling a cassette To change the label you have made Insert the cassette to change the label, and operate in the same way as you do to make a new label. If you set the write-protect tab of the tape to lock You cannot label the tape. Slide the write-protect tab to release the write protection. If you have superimposed titles in the cassette When the label is displayed, up to four titles also appear. When the "-----" indicator has fewer than 10 spaces The cassette memory is full. The "-----" indicates the number of characters you can select for the label. To erase a character Turn the SEL/PUSH EXEC dial to select [ C ], then press the dial. The last character is erased. To enter a space Select [ ], then select the blank part. 106
![](/manual_guide/products/sony-dcr-vx2100-operating-instructions-c7b73c8/106.png)
106
Labeling a cassette
To change the label you have made
Insert the cassette to change the label, and operate in the same way as you do to make a
new label.
If you set the write-protect tab of the tape to lock
You cannot label the tape. Slide the write-protect tab to release the write protection.
If you have superimposed titles in the cassette
When the label is displayed, up to four titles also appear.
When the “-----” indicator has fewer than 10 spaces
The cassette memory is full.
The “-----” indicates the number of characters you can select for the label.
To erase a character
Turn the SEL/PUSH EXEC dial to select [
C
], then press the dial. The last character is
erased.
To enter a space
Select [
], then select the blank part.