Sony DCR VX2100 Operating Instructions - Page 21
Recording a picture, Using the zoom feature, To zoom using the zoom lever/handle zoom lever - used camcorder
UPC - 027242639812
View all Sony DCR VX2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Recording - Basics Recording a picture Using the zoom feature To zoom using the zoom lever/handle zoom lever Press the power zoom lever a little for a slower zoom. Press it deeper for a faster zoom. Using the zoom function sparingly results in better-looking recordings. "T" side: for telephoto (subject appears closer) "W" side: for wide-angle (subject appears farther away) When using the handle zoom lever, you can change the zooming speed using the handle zoom switch. H: Fast L : Slow Handle zoom switch W T T W T W Notes •When the handle zoom switch is set to OFF, you cannot operate the handle zoom lever. •The handle zoom switch does not interlock with the zoom lever of the camcorder. When you shoot close to a subject If you cannot get a sharp focus, press the "W" side of the power zoom lever until the focus is sharp. You can shoot a subject that is at least about 80 cm (about 2 feet 5/8 inch) away from the lens surface in the telephoto position, or about 1 cm (about 1/2 inch) away in the wide-angle position. To zoom using the zoom ring Using the zoom ring, you can control the zoom by your desired speed and you can make fine adjustments. During recording, turn the zoom ring to the desired speed. Zoom ring For wide-angle For telephoto Note If you turn the zoom ring quickly, the zoom may not respond to the zoom ring. 21 Rotate the zoom ring with appropriate speed.