Sony DCR VX2100 Operating Instructions - Page 22

Recording a picture Using the disital zoom - Zoom greater than 12× Zoom greater than 12× is performed digitally, if you set D ZOOM to 24× or 48× in the menu settings. The digital zoom function is set to OFF as a default setting (p. 109). If you use the digital zoom function, the picture quality deteriorates. W T The right-ended portion of the bar shows the digital zooming zone. The digital zooming zone appears when you set D ZOOM to 24× or 48×. You cannot use the digital zoom: - When you set PROG. SCAN to ON in the menu settings (p. 109). - When the POWER switch is set to MEMORY. Indicators displayed during recording The indicators are not recorded on the tapes. [a] [b] [c] [d] 40min REC 0:00:01 [e] 45min [f] [g] ND1 [h] JUL 4 2003 12:05:56PM [j] [i] [a] Remaining battery time This appears after you turn on the power and wait for a while. [b]Cassette memory This appears when using a tape with cassette memory. [c] Recording mode [d] STBY/REC [e] Time code/Tape counter [f] Remaining tape This appears after you insert a cassette. [g]Guide frame [h]ND filter This flashes when the ND FILTER selector should be set. After you have set the ND FILTER selector, the ND FILTER position selected is indicated. (When the ND OFF position is selected, the indication disappears.) [i] Time The time is displayed about five seconds after the POWER switch is set to CAMERA or MEMORY. [j] Date 22 The date is displayed about five seconds after the POWER switch is set to CAMERA or MEMORY.