Sony DCR VX2100 Operating Instructions - Page 11

Getting Started Step 1 Preparing the power supply Until your camcorder calculates the actual remaining battery time "- - - - min" appears in the display window. While charging the battery pack, no indicator appears or the indicator flashes in the display window in the following cases: - The battery pack is not installed correctly. - The AC Adaptor is disconnected. - Something is wrong with the battery pack. When using the AC Adaptor Be sure to use it near the wall outlet. If a malfunction occurs, disconnect the plug from the wall outlet. Charging time Battery pack NP-F330 (supplied) NP-F550 NP-F730/F750 NP-F960 Full charge (Normal charge) 150 (90) 210 (150) 300 (240) 420 (360) Approximate minutes to charge an empty battery pack Recording time Battery pack Recording with the viewfinder NP-F330 (supplied) NP-F550 NP-F730 NP-F750 NP-F960 Continuous 75 (65) 150 (135) 265 (240) 315 (275) 575 (515) Typical* 40 (35) 80 (75) 145 (130) 175 (150) 320 (285) Recording with the LCD screen Continuous Typical* 60 (55) 130 (115) 230 (205) 265 (235) 480 (430) 30 (30) 70 (60) 125 (110) 145 (130) 265 (240) Approximate minutes of recording time when you use a fully charged battery Numbers in parentheses "( )" indicate the time using a normally charged battery. You cannot use the NP-500/510/710 battery pack on your camcorder. * Approximate minutes when recording while you repeat recording start/stop, zooming and turning the power on/off. The actual battery life may be shorter. 11