Sony DSX-S200X Operating Instructions - Page 24
Optimizing sound by Time Alignment - Listening Position, to select from Front R, Front L
UPC - 027242787896
View all Sony DSX-S200X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
3 Setting the equalizer curve. • Frequency range Rotate the multi way encoder to select "Band1" to "Band7." • Center frequency Push the multi way encoder left/right to select the center frequency. Selectable center frequency in each band: Band1: "40 Hz" or "63 Hz" Band2: "100 Hz" or "160 Hz" Band3: "250 Hz" or "400 Hz" Band4: "630 Hz" or "1.0 kHz" Band5: "1.6 kHz" or "2.5 kHz" Band6: "4.0 kHz" or "6.3 kHz" Band7: "10.0 kHz" or "16.0 kHz" • Volume level Push the multi way encoder up/down to adjust the equalizer curve. The volume level is adjustable in 1 dB steps, from -6 dB to +6 dB. 4 Press the multi way encoder when you finish all equalizer settings. 5 Press (BACK). The display returns to normal reception/play mode. To restore the factory-set equalizer curve, select "Initialize" and "Yes" in step 3. Tip Other equalizer curves are also adjustable. Optimizing sound by Time Alignment - Listening Position The unit can change the localization of sound by delaying the sound output from each speaker to suit your position, and simulate a natural sound field with the feeling of being in the center of it wherever you sit in the car. The options for "Listening Position Front/Rear" are indicated below. "Front R" (1): Front right "Front L" (2): Front left "Front" (3): Center front "All" (4): In the center of your car "Custom": Precisely calibrated position (page 25) "off": No position set You can also set the approximate subwoofer position from your listening position if: - the subwoofer is connected - the listening position is set to "Front R," "Front L," "Front" or "All." The options for "Listening Position Subwoofer" are indicated below. "Near" (A): Near "Normal" (B): Normal "Far" (C): Far 1 During reception/playback, press the multi way encoder. 2 Rotate the multi way encoder until "Listening Position Front/Rear" appears, then press it. 3 Push the multi way encoder up/down to select from "Front R," "Front L," "Front," "All" or "Custom," then press it. 4 Rotate the multi way encoder until "Listening Position Subwoofer" appears, then press it. If you select "Front R," "Front L," "Front" or "All" in step 3 above, you can set the subwoofer position. Push the multi way encoder up/down to select from "Near," "Normal" or "Far," then press it. 5 Press (BACK). The display returns to normal reception/play mode. To cancel listening position, select "off" on step 3. Note If you select "Custom" in step 3 above, you cannot set the subwoofer position. 24