Sony HT-C800DP Operating Instructions - Page 19
Step 1: Speaker System Hookup
View all Sony HT-C800DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Getting Started Step 1: Speaker System Hookup Before connecting the speakers, attach the color labels onto the rear panel of the speakers so that you can identify the speakers to be connected. For details on the color, refer to "Jacks for connecting the speakers" on page 20. Connect the supplied speaker system using the supplied speaker cords by matching the colours of the terminals to those of the cords. Do not connect any speakers other than those supplied with this system. To obtain the best possible surround sound, specify the speaker parameters (distance, level, etc.) on page 68. Required cords Speaker cords The connector and the colour tube of the speaker cords are the same colour as the jacks to be connected. Colour tube (+) (-) To change the speaker cord If you want to change the speaker cord, you can detach the supplied speaker cord from the connector. 1 Press the connector onto a flat surface. Make sure that the catcher is at the bottom. catcher 2 Pull the speaker cord from the connector. 3 Twist the stripped ends of the speaker cord you want about 10 mm (3/8 inches) and insert the speaker cord into the connector. Make sure that the speaker cord is inserted according to its polarity: + to + and - to -. (+) (-) continued 19GB