Sony HT-C800DP Operating Instructions - Page 78
Specifications
View all Sony HT-C800DP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 6 ohm loads, both channels driven, from 120 - 20,000 Hz; rated 60 watts per channel minimum RMS power, with no more than 0.7 % total harmonic distortion from 250 milliwatts to rated output (USA model only). Amplifier section Rated Power Output at Stereo Mode 60 W + 60 W (6 ohms, at 1 kHz, THD 0.7 %) Reference Power Output Front: 100 W/ch (6 ohms at 1 kHz, THD 10 %) Center*: 100 W (6 ohms at 1 kHz, THD 10 %) Surround*: 100 W/ch (6 ohms at 1 kHz, THD 10 %) Sub woofer*: 100 W (6 ohms at 100 Hz, THD 10 %) * Depending on the sound field settings and the source, there may be no sound output. Inputs (Analog) Outputs (Analog) ANALOG IN: Sensitivity: 500 mV Impedance: 50 kilohms PHONES: Accepts low- and high-impedance headphones CD/DVD system Laser Semiconductor laser (DVD: λ = 650 nm) (CD: λ = 780 nm) Emission duration: continuous Signal format system NTSC/PAL or NTSC Frequency response (at 2 CH STEREO mode) DVD (PCM): 2 Hz to 22 kHz (±1.0 dB) CD: 2 Hz to 20 kHz (±1.0 dB) Signal-to-noise ratio More than 80 dB Harmonic distortion Less than 0.03 % 78GB