Sony HT-ST9 Operating Instructions - Page 43
USB device, BLUETOOTH, Set [Control for HDMI] to [On], and then set [Audio Return Channel]
View all Sony HT-ST9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Increase the volume on the TV or cancel muting. When a TV compatible with Audio Return Channel (ARC) technology is connected with an HDMI cable, make sure the cable is connected to the HDMI input (ARC) terminal of the TV (refer to the supplied Startup Guide). If the TV is not compatible with Audio Return Channel (ARC) technology, connect the optical digital cable in addition to the HDMI cable in order to output sound (refer to the supplied Startup Guide). Set [Control for HDMI] to [On], and then set [Audio Return Channel] to [Auto] (page 25). The sound is output from both the system and the TV. Turn off the sound of the system or the TV. The TV sound from this system lags behind the image. Set [A/V SYNC] to [0ms] if it is set to the range between [25ms] and [300ms] (page 29). No sound or only very low-level sound of the device connected to the system is heard. Press + on the remote control and check the volume level (page 48). Press or + on the remote control to cancel the muting function (page 48). Make sure the input source is selected correctly. You should try other input sources by pressing INPUT on the remote control several times (page 7). Check that all the cables and cords of the system and the connected device are firmly inserted. No sound or only very low-level sound is heard from the subwoofer. Press SW + on the remote control to increase the subwoofer volume (page 48). Make sure that the on/standby indicator on the subwoofer is lit in green. If not, refer to "No sound is heard from the subwoofer." in "Wireless sound" (page 45). The subwoofer is for reproducing bass sound. In the case of input sources that contain very little bass sound components (i.e., a TV broadcast), the sound from the subwoofer may be difficult to hear. When you play content compatible with copyright protection technology (HDCP), it is not output from the subwoofer. The surround effect cannot be obtained. Depending on the input signal and the sound field setting, surround sound processing may not work effectively. The surround effect may be subtle, depending on the program or disc. To play multi-channel audio, check the digital audio output setting on the device connected to the system. For details, refer to the operating instructions supplied with the connected device. USB device The USB device is not recognized. Try the following: Turn the system off. Remove and reconnect the USB device. Turn the system on. Make sure that the USB device is securely connected to the (USB) port (page 8). Check to see if the USB device or a cable is damaged. Make sure that the USB device is on. If the USB device is connected via a USB hub, disconnect it and connect the USB device directly to the system. BLUETOOTH BLUETOOTH connection cannot be completed. Make sure that the indicator (blue) of the Bar Speaker is lit (page 11). System status Indicator (blue) status During BLUETOOTH pairing Flashes quickly The system is attempting to connect Flashes with a BLUETOOTH device Additional Information continued 43US