Sony HT-ST9 Operating Instructions - Page 54
On BLUETOOTH Communication, Video formats supported by the system
View all Sony HT-ST9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Video formats supported by the system Input/Output (HDMI Repeater block) Format 2D Frame packing 4096 × 2160p @ 59.94/60 Hz1) 4096 × 2160p @ 50 Hz1) 4096 × 2160p @ 23.98/24 Hz2) 3840 × 2160p @ 59.94/60 Hz1) 3840 × 2160p @ 50 Hz1) 3840 × 2160p @ 29.97/30 Hz2) 3840 × 2160p @ 25 Hz2) 3840 × 2160p @ 23.98/24 Hz2) 1920 × 1080p @ 59.94/60 Hz 1920 × 1080p @ 50 Hz 1920 × 1080p @ 29.97/30 Hz 1920 × 1080p @ 25 Hz 1920 × 1080p @ 23.98/24 Hz 1920 × 1080i @ 59.94/60 Hz 1920 × 1080i @ 50 Hz 1280 × 720p @ 59.94/60 Hz 1280 × 720p @ 50 Hz 1280 × 720p @ 29.97/30 Hz 1280 × 720p @ 23.98/24 Hz 720 × 480p @ 59.94/60 Hz 720 × 576p @ 50 Hz 640 × 480p @ 59.94/60 Hz 1) YCbCr 4:2:0/Supports 8-bit only 2) Supports 8-bit only 3D Side-bySide (Half) Over-Under (Top-andBottom) Design and specifications are subject to change without notice. 54US On BLUETOOTH Communication BLUETOOTH devices should be used within approximately 10 meters (33 feet) (unobstructed distance) of each other. The effective communication range may become shorter under the following conditions. - When a person, metal object, wall or other obstruction is between the devices with a BLUETOOTH connection - Locations where a wireless LAN is installed - Around microwave ovens that are in use - Locations where other electromagnetic waves occur BLUETOOTH devices and wireless LAN (IEEE 802.11b/g) use the same frequency band (2.4 GHz). When using your BLUETOOTH device near a device with wireless LAN capability, electromagnetic interference may occur. This could result in lower data transfer rates, noise, or inability to connect. If this happens, try the following remedies: - Use this system at least 30 meters (99 feet) away from the wireless LAN device. - Turn off the power to the wireless LAN device when using your BLUETOOTH device within 10 meters (33 feet). - Install this system and BLUETOOTH device as closer to each other as possible. The radio waves broadcast by this system may interfere with the operation of some medical devices. Since this interference may result in malfunction, always turn off the power on this system and BLUETOOTH device in the following locations: - In hospitals, on trains, in airplanes, at gas stations, and any place where flammable gasses may be present - Near automatic doors or fire alarms This system supports security functions that comply with the BLUETOOTH specification to ensure secure connection during communication using BLUETOOTH technology. However, this security may be insufficient depending on the setting content and other factors, so always be careful when performing communication using BLUETOOTH technology.