Sony HT-ST9 Operating Instructions - Page 51

Supported Audio Formats Audio formats supported by this system are as follows. Format LPCM 2ch LPCM 5.1ch LPCM 7.1ch Dolby Digital Dolby TrueHD, Dolby Digital Plus DTS DTS-ES Discrete 6.1, DTS-ES Matrix 6.1 DTS96/24 DTS-HD High Resolution Audio DTS-HD Master Audio DTS-HD LBR DSD MPEG-2 AAC Function "HDMI1" "HDMI2" "HDMI3" "TV" (DIGITAL IN) : Supported format. -: Unsupported format. Note The HDMI IN 1/2/3 jacks do not input sound in the case of an audio format that contains copy protections, such as Super Audio CD or DVD-Audio. Specifications Bar Speaker (SA-ST9) Amplifier section U.S. models: POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (FTC) Front L + Front R: With 6 ohms loads, both channels driven, from 200 - 20,000 Hz; rated 25 Watts per channel minimum RMS power, with no more than 1% total harmonic distortion from 250 milliwatts to rated output. POWER OUTPUT (reference) Front L/Front R speaker blocks: 75 Watts (per channel at 6 ohms, 1 kHz) Center speaker block: 75 Watts (per channel at 6 ohms, 1 kHz) Center tweeter block: 75 Watts (per channel at 6 ohms, 10 kHz) Canadian models: POWER OUTPUT (rated) Front L + Front R: 45 W + 45 W (at 6 ohms, 1 kHz, 1% THD) POWER OUTPUT (reference) Front L/Front R speaker blocks: 75 Watts (per channel at 6 ohms, 1 kHz) Center speaker block: 75 Watts (per channel at 6 ohms, 1 kHz) Center tweeter block: 75 Watts (per channel at 6 ohms, 10 kHz) Inputs HDMI IN 1*/2/3 DIGITAL IN (TV) ANALOG IN Output HDMI OUT* (ARC) * HDMI IN 1 and HDMI OUT (ARC) jacks support HDCP 2.2 protocol. HDCP 2.2 is newly enhanced copyright protection technology that is used to protect content such as 4K movies. Additional Information continued 51US