Sony ICD-UX523BLK Operating Instructions - Page 41

to selectAudio IN, and then press, REC/PAUSE to start recording.

Page 41 highlights

Table of Contents Index 41 Recording Files  Connect other equipment to the IC recorder when the IC recorder is in the stop mode. Connect the audio output connector (stereo mini-plug) of other equipment to the  jack of the IC recorder using an audio connecting cable. "Select Input" appears in the display window. If "Select Input" is not displayed, set it in the menu ( p. 83).  Press  or  to select "Audio IN," and then press /ENTER.  Press  REC/PAUSE to start recording. " " flashes and the IC recorder enters the recording pause mode.  Start playback on the piece of equipment connected to the IC recorder. " " appears on the display and synchronized recording starts. When no sound is detected for more than 2 seconds, "Dividing..." appears and then " " begins to flash. The synchronized recording pauses. The IC recorder starts recording again as a new file when sound is detected. To record without using the synchronized recording function Select "OFF" in step  of "To record using the synchronized recording function" ( p. 40), and then proceed with steps  through . When you press  REC/PAUSE in step , the built-in microphones are automatically cut off and the sound from the connected piece of equipment is recorded.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140

³1
³1
Recording Files
Table of
Contents
Index
Connect other equipment to the IC recorder when the IC recorder is
in the stop mode.
Connect the audio output connector (stereo mini-plug) of other
equipment to the
jack of the IC recorder using an audio connecting
cable.
“Select Input” appears in the display window.
If “Select Input” is not displayed, set it in the menu (
p
. 83
).
Press
or
to select“Audio IN,” and then press
/ENTER.
Press
REC/PAUSE to start recording.
” flashes and the IC recorder enters the recording pause mode.
Start playback on the piece of equipment connected to the IC
recorder.
” appears on the display and synchronized recording starts.
When no sound is detected for more than 2 seconds, “Dividing...” appears and
then “
” begins to flash. The synchronized recording pauses.
The IC recorder starts recording again as a new file when sound is detected.
To record without using the synchronized recording function
Select “OFF” in step
of “To record using the synchronized recording
function” (
p. 40)
, and then proceed with steps
through
. When you
press
REC/PAUSE in step
, the built-in microphones are automatically cut
off and the sound from the connected piece of equipment is recorded.