Sony ICD-UX523BLK Operating Instructions - Page 93

LCF Low Cut Filter, and noise cut, LPCM mode. When REC Mode is

Page 93 highlights

93 About the Menu Function Tabs (FM radio)*1 Menu items FM Radio*1 ( p. 69) Auto Preset*1 ( p. 72) DX/LOCAL*1 ( p. 75) *1 for ICD-UX522F/UX523F only Settings (* : Initial setting) The IC recorder enters the FM radio mode. Notes  While the FM radio is activated, you cannot change memory media or select a folder. Before starting FM radio recording, select the memory media and folder you want to use to record the FM broadcast in advance.  You cannot record an FM broadcast in LPCM mode. When "REC Mode" is set to "LPCM 44.1kHz/16bit," an FM broadcast is recorded in "MP3 192kbps."  During recording an FM radio broadcast, the Mic Sensitivity, VOR, LCF (Low Cut Filter), and noise cut functions are disabled. Scans automatically for available frequencies. The stations will be stored in memory. Execute: The automatic presetting is executed. Cancel: The automatic presetting is canceled. Sets the receiver sensitivity when listening to the FM radio. DX*: Normally, select this setting. LOCAL: When there is interference or collapsing caused by a intense electric field around the transmitting antenna of the broadcasting station, etc., select this setting. Note Select "DX" when the IC recorder reception status is not good due to a weak signal. Table of Contents Index

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140

¶²
¶²
About the Menu Function
Table of
Contents
Index
Tabs
Menu items
Settings (* : Initial setting)
(FM radio)
*
1
FM Radio
*
1
(
p. 69)
The IC recorder enters the FM radio
mode.
Notes
While the FM radio is activated, you
cannot change memory media or
select a folder. Before starting FM
radio recording, select the memory
media and folder you want to use to
record the FM broadcast in advance.
You cannot record an FM broadcast in
LPCM mode. When “REC Mode” is
set to “LPCM 44.1kHz/16bit,” an FM
broadcast is recorded in “MP3
192kbps.”
During recording an FM radio
broadcast, the Mic Sensitivity, VOR,
LCF (Low Cut Filter), and noise cut
functions are disabled.
Auto Preset
*
1
(
p. 72)
Scans automatically for available
frequencies. The stations will be stored
in memory.
Execute:
The automatic presetting is executed.
Cancel:
The automatic presetting is canceled.
DX/LOCAL
*
1
(
p. 75)
Sets the receiver sensitivity when
listening to the FM radio.
DX
*
:
Normally, select this setting.
LOCAL:
When there is interference or
collapsing caused by a intense
electric field around the transmitting
antenna of the broadcasting station,
etc., select this setting.
Note
Select “DX” when the IC recorder
reception status is not good due to a
weak signal.
*
1
for ICD-UX522F/UX523F only