Sony KDL-42EX440 Operating Instructions - Page 44

Using the Channel Settings Option Signal Type Auto Program Add Digital Channels Show/Hide Channels Edit Channel Labels Analog Fine Tune Description Cable Select if you are receiving cable channels via Cable TV provider. Antenna Select if you are using an antenna. Automatically sets up the channel list on the TV for all receivable channels. 1 Select Auto Program. 2 Select OK to start Auto Program. 1 Select Add Digital Channels. 2 Select OK to add digital channels. Allows you to show or hide channels that appear when you use the CH +/- buttons. 1 Press V/v to scroll through the channels until you find the channel you want to show or hide. Then press to select it. 2 Press V/v to determine if the channel will be shown or hidden. Then press to select it. Allows you to assign labels (such as station call letters) to channel numbers. 1 Press V/v to scroll through the channel numbers. Then press to select the channel number that you want to assign a label. 2 Press V/v to scroll through the label characters (A-Z, 0-9, etc.). Press b to move to the next character. Repeat the previous steps to add up to seven characters to the label. When finished, press . Allows you to fine-tune the selected analog channel manually if you feel that a slight tuning adjustment may improve picture quality. Select Auto to adjust to the most appropriate analog channel. • You should run Auto Program after changing the Signal Type setting. • Running Auto Program will clear the Favorites list. • Channels that you set to be hidden can be accessed by the 0-9 and buttons. • You can set channels to be hidden that are automatically set in Auto Program. 44