Sony KDL-42EX440 Operating Instructions - Page 8

Attaching the Table-Top Stand

Get Sony KDL-42EX440 PDF manuals and user guides View all Sony KDL-42EX440 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

Attaching the Table-Top Stand • Refer to the supplied stand leaflet for proper attachment. • For best picture quality, do not expose the screen to direct illumination or sunlight. 1 Place the TV with its screen facing down on a level and stable surface covered with a thick and soft cloth. 2 Fix the TV to the stand according to the arrow marks that guide the screw holes using the supplied screws. Thick and soft cloth Screw (+PSW 5 x 16) (Supplied) * Be careful not to hit the Table-Top Stand against the edge of the surface when attaching it. • To detach the Table-Top Stand from the TV, remove the three screws guided by the arrow mark on the Table-Top Stand. Do not remove any other screws. • Hold the Table-Top Stand with one hand to avoid it dropping when attaching. • This TV is very heavy, so two or more people should place the TV onto thick and soft cloth. • If using an electric screwdriver, set the tightening torque at approximately 1.5 N·m (15 kgf·cm). 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
8
Attaching the Table-Top Stand
•
Refer to the supplied stand leaflet for proper attachment.
•
For best picture quality, do not expose the screen to direct illumination or sunlight.
1
Place the TV with its screen facing down on a level and stable surface covered with
a thick and soft cloth.
2
Fix the TV to the stand according to the arrow marks
that guide the screw holes
using the supplied screws.
•
To detach the Table-Top Stand from the TV, remove the three screws guided by the arrow mark
on the Table-Top Stand. Do not remove any other screws.
•
Hold the Table-Top Stand with one hand to avoid it dropping when attaching.
•
This TV is very heavy, so two or more people should place the TV onto thick and soft cloth.
•
If using an electric screwdriver, set the tightening torque at approximately 1.5 N·m (15 kgf·cm).
Thick and soft cloth
Screw (+PSW 5 x 16)
(Supplied)
*
Be careful not to hit the Table-Top Stand against the edge of
the surface when attaching it.