Sony KDL 52W5100 Operating Instructions - Page 21

TV Controls and Indicators POWER 6 CHANNEL 7 Operating the TV VOLUME 1 PIC OFF / TIMER HD SIGNAL POWER/STANDBY 8 INPUT 9 2 3 4 HOME q; 5 Item 1 Speaker 2 PIC OFF/ TIMER 3 HD SIGNAL 4 POWER/ STANDBY 5 (IR) Infrared Receiver Light Sensor 6 POWER 7 - CHANNEL + 8 - VOLUME + Description Outputs audio signal. Lights up in orange when the Timer or Sleep Timer is set. Lights up and/or blinks in orange during a software upgrade. Lights up in green when the Power Saving is set to Picture Off. Lights up when the TV receives HD signal including up converted signals. Lights up in red when your TV is in PC power saving mode or during the software upgrade. Lights up in green when the TV is turned on. If the LED blinks in red continuously, this may indicate that the TV needs servicing (see contacting Sony information on the front cover). Receives IR signals from the remote control. Do not block this area, as it may interfere with remote control operation. Senses room light level and adjusts the screen brightness accordingly. Do not put anything near the sensor or the nearby general area (as shown above), as its function may be affected. Press to turn on and off the TV. Press to scan through channels. To scan quickly through channels, press and hold down either +/-. In the MENU screen, these buttons serve as up/down buttons. Press to adjust the volume. In the MENU screen, these buttons serve as left/right buttons. 9 INPUT 0 HOME Press to display the list of inputs or confirm your selection. Press repeatedly to toggle through the inputs. ~ • Inputs can be changed by pressing V/v and while the list of external inputs is displayed. • Refer to page 33 for information about setting up the external inputs labels. In the MENU screen, this button serves to confirm the selection or setting. Press to display TV Home Menu/XMB™ to access TV Settings and other media and network related content. 21