Sony KDL 52W5100 Operating Instructions - Page 35

Exploring the XMB™ and TV Features BRAVIA® Sync™ with Control for HDMI The BRAVIA Sync function allows this TV to communicate with other Sony equipment supporting the Control for HDMI function. To connect Sony equipment with Control for HDMI Use an HDMI cable that bears the HDMI logo for connection. Line up the triangle on the head of the HDMI cable with the triangle on the label of the HDMI input when connecting the HDMI cable. Setting the Control for HDMI The Control for HDMI function must be set up in order for the TV to communicate with other Control for HDMI enabled equipment. To setup the TV's Control for HDMI: 1 Select Channels & Inputs on the Settings menu. 2 Highlight HDMI Settings and press . 3 Select Control for HDMI and set it to On. To verify connected devices, select Device List from the HDMI Settings menu. For other equipment, refer to its operating instructions. Available options using Control for HDMI The following operations are available after you connect the supported Sony equipment with Control for HDMI function to your TV: • Automatically turn off the connected equipment when you turn off the TV. • The connected equipment and TV are turned on by One-Touch-Play. • Possible operations with BRAVIA Sync buttons, see page 18. When a Sony A/V receiver with BRAVIA Sync is connected, the following additional operations are possible: • Turning on the A/V receiver when the TV is turned on. • Automatically switching to the audio output of the A/V receiver's attached speakers. • Adjusting the volume and muting of the A/V receiver with the TV's remote control. 35