Sony KLV-32S550A Operating Instructions - Page 21

Using MENU Functions PC Input Signal Reference Chart for supported signals and "Resolution:" value displayed Signals VGA SVGA XGA WXGA Horizontal (Pixel) Vertical (Line) 640 480 640 480 720 400 800 600 800 600 1024 768 1024 768 1024 768 1280 768 1280 768 1360 768 Horizontal frequency (kHz) 31.5 37.5 31.5 37.9 46.9 48.4 56.5 60 47.4 47.8 47.7 Vertical frequency (Hz) 60 75 70 60 75 60 70 75 60 60 60 Standard VGA VESA VGA-T VESA Guidelines VESA VESA Guidelines VESA VESA VESA VESA VESA • This TV's PC input does not support Sync on Green or Composite Sync. • This TV's PC input does not support interlaced signals. • If input signal is not shown in above chart, then this signal may not be displayed properly or cannot be displayed according to your settings. z • For the best picture quality, it is recommended to use the signals (boldfaced) in the above chart with a 60 Hz vertical frequency from a personal computer. In plug and play, signals with a 60 Hz vertical frequency will be selected automatically. Channel Set-up menu 1 Digit Direct Favourite Set-up Auto Tuning Programme Sorting Programme Labels Programme Block When "1 Digit Direct" is set to "On", you can select a channel using one preset number button (0 - 9) on the remote. • When "1 Digit Direct" is set to "On", you cannot select channel numbers 10 and above entering next digit using the remote. Allows you to set your favourite channels by assigning the desired channel numbers. 1 Press F/f to select your favourite channel number, then press . 2 Press F/f to select your desired channel, then press . To reset the Favourite channels Select "_ _", then press . Repeat the procedure above to set other favourite channels. Tunes in all the available channels. This option allows you to retune the TV after moving house, or to search for new channels that have been launched by broadcasters. Changes the order in which the channels are stored on the TV. 1 Press F/f to select the channel you want to move to a new position, then press . 2 Press F/f to select the new position for your channel, then press . Assigns a channel name of your choice up to five letters or numbers. The name will be displayed briefly on the screen when the channel is selected. 1 Press F/f to select the channel you want to name, then press . 2 Press F/f to select the desired letter or number ("_" for a blank space), then press g. If you input a wrong character Press G/g to select the wrong character. Then, press F/f to select the correct character. To delete all the characters Select "Reset", then press . 3 Repeat the procedure in step 2 until the name is completed. 4 Select "OK", then press . Blocks an individual channel from being watched. 1 Press F/f to select the channel you want to block, then press . 2 Press F/f to select "Block", then press . To watch the channel, select "Allow". Continued 21 GB