Sony KP-53HS10 Operating Instructions - Page 25
Connecting an Amplifier That Supports Dolby Pro Logic Decoder
View all Sony KP-53HS10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Connecting an Amplifier That Supports Dolby Pro Logic Decoder If you use an amplifier with a Dolby Pro Logic decoder instead of the projection TV's audio system, you can still use the projection TV's speaker as a center speaker. 1 Using the speaker cords (supplied with the amplifier), connect the speaker terminals on the amplifier to CENTER SPEAKER IN +/- on the projection TV. 2 Using an AUDIO cable, connect AUDIO (FIX) OUT on the projection TV to one of the unused Line inputs (e.g. Tape-2, AUX1, etc.) on the amplifier (White-AUDIO Left, red-AUDIO Right). 3 Set the amplifier to the chosen Line input and use the AUDIO menu to set "SPEAKER" to "CENTER IN" on the projection TV. (see "SPEAKER" on page 36) Disconnect all power sources before making any connections. (Rear of projection TV) CENTER IN # AUDIO OUT FIX VAR CENTER IN 3 L 1 R AUDIO (FIX) OUT-L AUDIO (FIX) OUT-R 2 RK-74A (not supplied) Line input 3 Amplifier with Dolby Pro Logic decoder Rear speaker (L) Front speaker (L) Rear speaker (R) Front speaker (R) 21 Installing and Connecting the Projection TV