Sony KP-53HS10 Operating Instructions - Page 42

1 Move the joystick up or down to select the desired channel. You can view the channel that is selected with the CHANNEL SKIP menu in the center sub screen. You can also use CH +/- or 0-9 and ENTER buttons. 2 Press . 3 Move the joystick up or down to select YES, and press . The selected channel will be erased. If you want to re-enter the skipped channel, follow the steps above and select NO. CHANNEL CAPTION - Easy recognition of the channel you are watching You can add a caption for up to 32 channels of both VHF/UHF and AUX inputs. CHANNEL CAPTION CHANNEL : CAPTION : - -- - --- With the CHANNEL CAPTION window open: Move Select Exit MENU 1 Press and then move the joystick up or down to select the desired channel. You can view the channel that is selected with the CHANNEL CAPTION menu in the center sub screen. 2 Press . 3 Move the joystick up or down to display the first letter or number of the caption and press to select it. 4 Repeat until up to four digits are selected. 5 Press . 38 To erase a caption, press RESET. CABLE - Cable system setting Select ON if your projection TV is connected to a cable system. Select OFF if your projection TV is connected to an antenna. AUTO SET UP will automatically set CABLE to ON. AUTO PROGRAM - Automatic channel presetting Select YES to signal the projection TV to automatically program all receivable TV channels. When all the receivable channels are stored, the lowest numbered channel will be displayed. Select NO to cancel AUTO PROGRAM. FAVORITE CHANNEL - User's favorite channels The FAVORITE CHANNEL feature enables easy access to the eight channels that you preset (or the last channel that you were watching). (for details on how to set up this feature, see "Setting and Selecting FAVORITE CHANNEL" on page 39) CHANNEL FIX - Locks selection of your projection TV's input when used in conjunction with external equipment such as a cable box, AV receiver, etc. 2-6: When the cable box is connected to the VHF/UHF input, you can fix the TV's input to one of the channels between 2 and 6. Press DBS/CABLE (FUNCTION) and then CH +/- to change the cable box channels. AUX 2-6: Use this when a cable box is connected to AUX, and a cable or antenna is connected to VHF/UHF. VIDEO 1: Use this when you have connected external video equipment (e.g. AV receiver) and you want the projection TV's input fixed to it. OFF: When you want to switch CHANNEL FIX off. If the projection TV is in the AUX mode when you turn CHANNEL FIX off, press ANT to return to UHF input mode. TIMER settings are erased when CHANNEL FIX is set. Note: • You cannot change channels with the TV's tuner when you set CHANNEL FIX. If you want to use the TV's tuner while fixing the TV's input to VIDEO 1, use the SET UP menu to set SELECT OUT to TV OUT. (see "SELECT OUT" on page 41)