Sony KP-53HS10 Operating Instructions - Page 29

Using Your New Projection TV Watching the TV Many TV features can be accessed directly through the remote control. The following will explain the function of some buttons found on your remote control. Using the white labeled buttons for projection TV operations REFER TO THE ILLUSTRATION OF THE REMOTE CONTROL ON THE INSIDE FRONT COVER OF THIS MANUAL AS YOU REVIEW THE FOLLOWING DESCRIPTIONS TV (FUNCTION) Activates the remote control for use with the projection TV. ANT - (AUX input) Press to change between the VHF/UHF input and the AUX input. (for detailed connection information, see "Cable and antenna" or "Cable box and cable" on page 8). TV POWER Turns the projection TV on and off. If a video input indication (e.g., VIDEO 1, VIDEO 2) appears on the screen, press TV/VIDEO until a channel number appears. 0 - 9 and ENTER Use for direct channel selection. Press 0-9 to select a channel (for example, to select channel 10, press 1 and 0). The channel will change after 2 seconds, or you can press ENTER for immediate selection. CH +/- Press to scan through the channels (+ up or - down). VOL +/- Press to adjust the volume (+ up or - down). JUMP Press to alternate or jump back and forth between two channels. The projection TV will jump between the current channel and the last channel selected using the 0-9 buttons. MUTING Press to mute the sound. "MUTING" will appear on the screen and will dim three seconds later. To restore sound, press again or press VOL +. FREEZE - (yellow labeled button) This is useful when you need to copy down information that appears on the TV's screen. Press to freeze the picture. Press again or press (OFF) to cancel. If you select TWIN as a FREEZE MODE in the SET UP menu, you can freeze the desired scene and display it on the left while viewing the normal picture on the right. (see "FREEZE MODE" on page 42) (continued) 25 Using Your New Projection TV