Sony LBT-GPX77 Operating Instructions - Page 26

2 Hold down ENTER and PHASER for about 3 seconds. "PAIR HISTORY" and "CLEAR" appear in the display panel and all the pairing information is erased. Setting the Bluetooth audio codecs You can select the Bluetooth audio codecs when the connected Bluetooth device supports Advanced Audio Coding (AAC). 1 Press OPTIONS on the unit. 2 Press / repeatedly to select "BT AAC", then press . 3 Press / repeatedly to select "BT AAC ON" or "BT AAC OFF". • BT AAC ON: Advanced Audio Coding (AAC) is selected if the Bluetooth device supports AAC. • BT AAC OFF: Sub Band Codec (SBC) is selected. Notes • You can enjoy high quality sound if the AAC is selected. In case you cannot listen to AAC sound from your device, select "BT AAC OFF". • If you change this setting while the system is connected to a Bluetooth device, the Bluetooth device will be disconnected. To connect to the Bluetooth device, perform the Bluetooth connection again. Setting/Canceling Bluetooth standby mode The system goes into Bluetooth standby mode and waits for a Bluetooth connection, even when the system is turned off. 1 Press OPTIONS on the unit. 2 Press / repeatedly to select "BT STANDBY", then press . 3 Press / repeatedly to select "STANDBY ON" or "STANDBY OFF". 4 Press ?/1 to turn off the system. When Bluetooth standby mode is set to on, the system will turn on automatically when you establish the Bluetooth connection from the Bluetooth device. Note The system will not enter Bluetooth standby mode if you erase the pairing information. 26GB