Sony LBT-GPX77 Operating Instructions - Page 37
Messages, No Disc, No Step, Not In Use, Off Time Ng, Push Select, Push Stop, Reading, Step Full
View all Sony LBT-GPX77 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
• If there are obstacles between the system and your Bluetooth device, remove or avoid the obstacles. • If there is equipment that generates electromagnetic radiation, such as a wireless LAN, other Bluetooth device, or a microwave oven nearby, move them away. The sound of your Bluetooth device cannot be heard on this system. • Increase the volume on your Bluetooth device first, and then adjust the volume using VOLUME +/-. There is severe hum, noise or distorted sound. • If there are obstacles between the system and your Bluetooth device, remove or avoid the obstacles. • If there is equipment that generates electromagnetic radiation, such as a wireless LAN, other Bluetooth device, or a microwave oven nearby, move them away. • Turn down the volume of the connected Bluetooth device. To reset the system If the system still does not operate properly, reset the system to factory default settings. Use the buttons on the unit to perform this operation. 1 Unplug and plug the power cord back in. 2 Press "/1 to turn on the system. 3 Hold down x and LED COLOR at the same time for about 3 seconds. "RESET" appears in the display panel. All user-configured settings, such as preset radio stations, timer, and the clock are reset to factory default setting. Messages Disc/Timer NO DISC There is no disc on the disc tray or you have loaded a disc that cannot be played back on this system. NO STEP All of the programmed steps have been erased. NOT IN USE You tried to perform a specific operation under conditions where that operation is prohibited. OFF TIME NG The Play Timer or Recording Timer start time and stop time is the same. PUSH SELECT You tried to set the clock or timer during timer operation. PUSH STOP You tried to perform an operation that can be performed only when the playback is stopped. READING The system is reading information of the disc or USB device. Some operations are not available. STEP FULL You tried to program more than 25 steps. UNLOCK The disc theft-preventive function is released. USB device DEVICE FULL The memory of the USB device is full. FATAL ERROR The USB device was removed during transfer or erase operation, and may have been damaged. Additional Information 37GB