Sony LBT-GPX77 Operating Instructions - Page 30
Changing the display, Changing the spectrum, pattern of the display panel
View all Sony LBT-GPX77 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
5 Use the same procedure as in step 4 to set the time to stop playback or transferring. 6 Press / repeatedly to select the sound source you want, then press . For Recording Timer: Connect a transferable USB device to the B port. 7 Press "/1 to turn off the system. To check the timer setting or activate the timer again 1 Press TIMER MENU. "TIMER SELECT" flashes in the display panel. 2 Press . 3 Press / repeatedly to select "PLAY SELECT" or "REC SELECT", then press . To cancel the timer Repeat the same procedure as above and select "TIMER OFF" in step 3, and then press . Notes • The system turns on before the preset time. If the system is turned on at the preset time or if "STANDBY" flashes in the display panel, the Play Timer and the Recording Timer will not play or transfer. • Do not operate the system from the time the system turns on until the playback or transferring starts. Changing the display Changing the display mode Press DISPLAY repeatedly while the system is turned off. Demonstration The display changes and the indicator flashes even when the system is turned off. No display (Power Saving Mode) The display is turned off to conserve power. The timer and clock continue to operate. Clock The clock display automatically turns to Power Saving Mode after a few seconds. Changing the spectrum pattern of the display panel 1 Press OPTIONS on the unit. 2 Press / repeatedly to select "SPECTRUM", then press . 3 Press / repeatedly to select the spectrum pattern you want, then press . To exit the OPTIONS menu, press OPTIONS on the unit. 30GB