Sony LBT-GPX77 Operating Instructions - Page 38
Precautions, Folder Full, No Device, No Memory, No Step, No Track, Not In Use, Not Supported
View all Sony LBT-GPX77 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
FOLDER FULL The number of folders has reached the maximum. NO DEVICE No USB device is connected. NO MEMORY The memory selected for playback or transfer has no memory media inserted in the USB device. NO STEP All of the programmed steps have been erased. NO TRACK No playable file is loaded in the system. NOT IN USE You tried to perform a specific operation under conditions where that operation is prohibited. NOT SUPPORTED An unsupported or unknown USB device is connected, or the USB device is connected through a USB hub. PROTECTED The USB device is write-protected. PUSH STOP You tried to perform an operation that can be performed only when the playback is stopped. READING The system is reading information of the USB device. Some operations are not available. REC ERROR The transfer did not start, stopped partway, or otherwise could not be performed. STEP FULL You tried to program more than 25 steps. TRACK FULL The number of files has reached the maximum. 38GB Precautions When carrying the unit Perform the following procedure to protect the disc mechanism. Use the buttons on the unit to perform this operation. 1 Press "/1 to turn on the system. 2 Press CD. 3 Remove the disc. Press Z OPEN/CLOSE to open and close the disc tray. Wait until "NO DISC" appears in the display panel. 4 Hold down CD and FLANGER for 3 seconds. "MECHA LOCK" appears in the display panel. 5 Unplug the power cord. Notes on discs • Before playing, wipe the disc with a cleaning cloth from the center outward to the edge. • Do not clean discs with solvents, such as benzine, thinner, or commercially available cleaners or anti-static spray intended for vinyl LPs. • Do not expose discs to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight. On safety • Completely disconnect the power cord (mains lead) from the wall outlet (mains) if it is not going to be used for an extended period of time. When unplugging the unit, always grip the plug. Never pull the cord itself. • Should any solid object or liquid get into the system, unplug the system, and have it checked by qualified personnel before operating it again. • (For customers in United States only) One blade of the plug is wider than other for the purpose of safety and will fit to the wall outlet only one way. If you are unable to insert the plug fully in the outlet, contact your dealer. • AC power cord must be changed only at the qualified service shop.