Sony MXD-D5C Operating Instructions - Page 20
Useful Tips for Recording, Smart Space
![]() |
View all Sony MXD-D5C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Recording on MDs Useful Tips for Recording When using the remote, set SELECT to MD. MENU/NO § EJECT INPUT When "CD" is selected After passing through the Sampling Rate Converter (SRC), the digital signal input from the CD is output to the ANALOG OUT jacks and PHONES jack after D/A conversion. "- DA" appears in the display at this time. To stop monitoring the signal Press p. AMS REC r TIME/CHAR Checking the remaining recordable time on the MD Press TIME/CHAR. • When you press the button repeatedly while the deck is stopped, the display alternates between total disc playing time and remaining recordable time on the MD (see page 13). • When you press the button repeatedly while recording, the display alternates between the recording time of the current track and the remaining recordable time on the MD. Monitoring the input signal (Input Monitor) Before starting recording, you can monitor the selected input signal through the deck's output jacks. 1 Press § EJECT to remove the MD. 2 Press INPUT to select the input signal you want to monitor. 3 Press REC r. When "ANLG" is selected The input analog signal is output to the ANALOG OUT jacks and the PHONES jack after A/D and D/A conversion. "AD - DA" appears in the display at this time. When "OPT" is selected After passing through the Sampling Rate Converter (SRC), the digital signal input from the DIGITAL OPTICAL IN connector is output to the ANALOG OUT jacks and PHONES jack after D/A conversion. "- DA" appears in the display at this time. If "Auto Cut" appears in the display (Auto Cut) There has been no sound input for about 30 seconds during recording. The 30 seconds of silence are replaced by a blank of about 3 seconds and the deck changes to recording pause. If the deck continues pausing for about 10 minutes after the Auto Cut Function activated, recording stops automatically. Note that this function does not activate even if there has been no sound input for about 30 seconds when the deck started recording from the blank portion. Also, this function does not work when recording from the CD player section of this deck. z You can turn off the Auto Cut Function For details, see "To turn off the Smart Space Function and Auto Cut Function" below. Note that when you turn off the Auto Cut Function, the Smart Space Function is turned off automatically. If "Smart Space" appears in the display (Smart Space) There has been an extended silence of 4 to 30 seconds in length during recording. The silence is replaced with a blank of about 3 seconds and the deck continues recording. Note that new track numbers may not be marked for portions recorded while this function is activated. Also, the Smart Space Function does not activate even if there has been an extended silence of 4 to 30 seconds in length when the deck started recording from the blank portion. To turn off the Smart Space Function and Auto Cut Function 1 While the deck is stopped, press MENU/NO twice to display "Setup Menu." 2 Turn AMS to select "S.Space On," then press AMS. 3 Turn AMS to select "S.Space Off," then press AMS. 4 Press MENU/NO. 20
![](/manual_guide/products/sony-mxdd5c-operating-instructions-469198c/20.png)