Sony MXD-D5C Operating Instructions - Page 36

Editing Recorded MDs 3 Press an alphabet/number button to enter a character. If you selected uppercase or lowercase letters 1 Press the corresponding letter/number button repeatedly until the character to be entered flashes. Or, press the button once and press =/+ repeatedly. 2 Press ). The flashing character is entered and lights continuously and the cursor shifts to the right. 4 Repeat Steps 2 and 3 until you have entered the entire title. If you entered the wrong character Press 0 or ) until the character to be corrected starts flashing. Press CLEAR to erase the incorrect character, then enter the correct one. 5 Press YES. To cancel labeling Press MENU/NO or p. Erasing a title on a disc (Name Erase Function) Use this function to erase a title on a disc. 1 While the deck is stopped, playing, recording, or pausing, press MENU/NO to display "Edit Menu." 2 Turn AMS to select "Name?," then press AMS or YES. 3 Turn AMS to select "Nm Erase?," then press AMS or YES. 4 Turn AMS to select "Disc" to erase the disc title, or the track whose title you want to erase and press AMS or YES. "Complete!" appears for a few seconds and the title is erased. To cancel the Name Erase Function Press MENU/NO or p. Changing an existing title Z 1 Press NAME EDIT/SELECT, then do the following: To change Make sure that the deck is the track title Playing, pausing or recording the track whose title is to be changed, or stopped after locating the track whose title is to be changed the disc name Stopped with no track number appearing in the display 2 Press down CLEAR until the current title is erased. 3 Enter the new title. Do Steps 6 to 9 of "Labeling Recordings" on page 33, or Steps 2 to 4 of "Labeling tracks and MDs with the remote" on page 35. 4 Press YES. 36