Sony MXD-D5C Operating Instructions - Page 42
Display Messages, Additional Information
![]() |
View all Sony MXD-D5C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Additional Information Display Messages The following table explains the various messages that appear in the display. Also, the deck has a SelfDiagnosis Function (see page 51). Message Meaning Blank Disc A new (blank) or erased MD has been inserted. Cannot Copy An attempt was made to make a second copy from a digitally dubbed MD (see page 46). Cannot Edit An attempt was made to edit the MD during Program or Shuffle Play or to change the recording level of an MD recorded in LP2 or LP4 Stereo mode. Or the MD is record-protected. CD Error! An operational error has occurred in the CD player section. Wait a few seconds, and then try the operation again. Disc Full! The MD is full (see "System Limitations" on page 43). Edit NOW You pressed 1/u while in S.F Edit (changing the recording level after recording, Fade-in, Fade-out) mode. If you turn off the deck while in S.F Edit mode, any changes that you have made will not be made properly. Finish the changes and leave S.F Edit mode before turning off the deck. Impossible The deck cannot do the specified editing operation (see pages 30 and 32). Incomplete! The S.F Edit (changing the recording level after recording, Fade-in, Fade-out) operation was not performed properly because the deck was moved while recording was in progress or the MD is damaged or dirty. Initialize (flashing This happens when the deck has been when you turn on disconnected from the AC power source the deck) for certain period of time. Name Full! The titling capacity of the MD has reached its limit (about 1,700 characters). No Change While attempting to change the recording level after recording, you pressed AMS or YES without actually changing the recording level, so no change was made. No Disc There is no MD or CD in the deck. No Name The disc or track has not been labeled. Premastered An attempt was made to record on the premastered MD. Message -Retry- Step Full! Meaning The deck is retrying reading data from the CD (see page 11). The program contains the maximum number of tracks. You cannot set additional tracks. 42
![](/manual_guide/products/sony-mxdd5c-operating-instructions-469198c/42.png)