Sony MXD-D5C Operating Instructions - Page 40

Operating the Deck Using a Keyboard Labeling tracks and MDs using the keyboard If you use a keyboard, you can quickly enter names. 1 Press [Enter] while the deck is in one of the operating modes listed below, depending on what you want to label: To label Press while the deck is A track An MD Playing, paused, recording, or stopped with the track number displayed Stopped with total number of tracks displayed A flashing cursor appears in the display. 2 Enter a name. In addition to letter keys, you can also use the keys shown in the following table. 3 Press [Enter]. The whole name appears in the display. Operations you may want to do while labeling a track or an MD To Press on the keyboard Cancel the operation [Esc] Switch between uppercase [Caps Lock] and lowercase letters Move the cursor [N] or [n] Erase the character at the cursor position [Delete] Erase the character preceding the cursor [Back Space] z You can use any IBM*-compatible keyboard** with a PS/2 interface. * IBM is the registered trademark of International Business Machines Corporation. ** Power consumption must be 120 mA or less. Operating the deck using the keyboard You can operate the deck by using the keyboard keys. This allows you to control the deck without using buttons and control on the deck and on the remote. As the keyboard substitutes for the following functions Press · (MD) [F1] P (MD) [F2] p (MD) [F3] · (CD) [F5] P (CD) [F6] p (CD) [F7] D.SKIP [F8] AMS or = (MD) [F9] AMS or + (MD) [F10] AMS or = (CD) [F11] AMS or + (CD) [F12] 40