Sony MXD-D5C Operating Instructions - Page 34
Editing Recorded MDs, If you entered the wrong character, To erase a character, To enter a space
![]() |
View all Sony MXD-D5C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Editing Recorded MDs 5 Press AMS or YES. A flashing cursor appears in the display. The deck starts playing and you can name a track while monitoring the sound. 6 Press TIME/CHAR to select the character type as follows: To select Press TIME/CHAR repeatedly until Uppercase letters "A" appears in the display Lowercase letters "a" appears in the display Numbers "0" appears in the display Symbols " ' " appears in the display 7 Turn AMS to select the character. The selected character flashes. Letters, numbers, symbols, and a space appear in sequential order as you turn AMS. You can use the following symbols in titles: 9 Repeat Steps 7 and 8 until you have entered the entire title. If you entered the wrong character Press 0 or ) until the character to be corrected starts flashing, and repeat Steps 7 and 8 to enter the correct character. To erase a character Press 0 or ) until the character to be erased starts flashing, then press CLEAR. To enter a space* Press AMS while the cursor is flashing. * You cannot select a space for the first character of the title. 10 Press YES. To cancel labeling Press MENU/NO or p. Note You cannot label a track or an MD while you are recording over an existing track. You can press TIME/CHAR to change the character type at any time during Step 7 (see Step 6 above). 8 Press AMS to enter the selected character. The selected character stops flashing and the cursor flashes waiting for the input of the next character. 34
![](/manual_guide/products/sony-mxdd5c-operating-instructions-469198c/34.png)