Sony MZ-N910 Help - Page 27
Long-time recording (MDLP), Jog dial
![]() |
View all Sony MZ-N910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
7 Play the source you want to record. The recorder starts recording automatically when it receives the playing sound. To stop recording Press x. z When there is no sound from the player for about 3 seconds during synchro-recording, the recorder goes into the standby mode automatically. When the sound comes from the player again, the recorder resumes synchrorecording. If the recorder is kept in the standby mode for 5 minutes or longer, the recorder stops automatically. Notes • The pause function cannot be turned on or off manually during synchro-recording. • Do not switch the "SYNC REC" setting while recording. Recording may not be done properly. • Even when there is no sound on the sound source, there may be cases when recording does not pause automatically during synchrorecording due to the noise level emitted from the sound source. • If a silent portion is encountered for approximately 2 seconds during synchrorecording from a sound source other than a CD or an MD, a new track mark is automatically added at the point where the silent portion ends. Long-time recording (MDLP) Select each recording mode according to the recording time that you want. Stereo recording is possible at 2 times (LP2) or 4 times (LP4) the normal (stereo) recording time. Monaural recording at 2 times normal recording time is also possible. MDs recorded in MDLP mode can be played back only on MD players or recorders with MDLP playback mode. Jog dial REC 1 While the recorder is stopped, press the jog dial. 2 Turn the dial until "REC SET" appears in the display, and then press the jog dial. 3 Turn the dial until "REC MODE" appears in the display, and then press the jog dial. continued 27
![](/manual_guide/products/sony-mzn910-help-010b09b/27.png)