Sony MZ-N910 Help - Page 35
Selecting the sound quality (6-Band Equalizer), Frequency 100 Hz
View all Sony MZ-N910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
A B LIVE V-SUR L CLUB V-SUR C ARENA V-SUR A 4 Press the jog lever to enter the selected surround mode. Selecting the sound quality (6-Band Equalizer) 1 While playing, press SOUND repeatedly to select "SOUND." 2 Press SOUND for 2 seconds or more. 3 Slide the jog lever repeatedly to select the sound mode. To modify and store the sound You can modify the sound and store the results in "CUSTOM1" and "CUSTOM2". 1 Do steps 1 to 3 of "Selecting the sound quality (6-Band Equalizer)" (page 35), and slide the jog lever until "CUSTOM1" or "CUSTOM2" appears. 2 Press the jog lever. 3 Slide the jog lever repeatedly to select the frequency. Frequency (100 Hz) From the left, you can select 100 Hz, 250 Hz, 630 Hz, 1.6kHz, 4 kHz, or 10 kHz 4 Turn the volume control repeatedly to adjust the level. Each time you slide the jog lever, A and B change as follows: A B HEAVY SOUND H POPS SOUND P JAZZ SOUND J UNIQUE SOUND U CUSTOM1 SOUND 1 CUSTOM2 SOUND 2 4 Press the jog lever to enter the selected sound mode. To cancel the procedure Press x for 2 seconds or more. To cancel the setting Press SOUND repeatedly until the indication at B disappears. Level (+6 dB) You can select from among seven levels. -6 dB, -3 dB, 0 dB, +3 dB, +6 dB 5 Repeat steps 3 and 4 to adjust the level for each frequency. 6 Press the jog lever to enter the selection. To cancel the procedure Press x for 2 seconds or more. To return to the preceding setting Press x. Note When you assign "SOUND" settings to "CUSTOM1" or "CUSTOM2", the maximum volume setting will be limited to a certain level ("VOL 24") to prevent excessive loudness. For the recorder operation, see page 62. 35