Sony MZ-N910 Help - Page 43

Dividing a track (Divide) You can divide a track with a track mark, creating a new track from the part following the track mark. You can also make fine adjustments to the track mark position before making the actual division. The track numbers will increase as follows. This function can be set with the recorder only. Note You cannot add a track mark on a track that has been checked-out from your computer. 1 2 34 Track marking 12345 Track numbers increase. T MARK Jog dial Adjusting the dividing point before dividing a track (Divide Rehearsal) 1 While playing, press T MARK for 2 seconds or more. Four seconds of the track from the point T MARK is pressed is played back repeatedly. The point T MARK is pressed. Four seconds of the track plays back repeatedly. 2 Turn the jog dial to adjust the point to divide. Turning the jog dial moves the dividing point forward or backwards. The dividing point can be moved up to a maximum of 8 seconds forward or backwards from the point T MARK was pressed in step 1. The point T MARK is pressed in step 1. The dividing point shifts a maximum of 8 seconds forward or backwards. Dividing a track directly 1 While playing or pausing an MD, press T MARK on the recorder at the point you want to mark. "MARK ON" appears in the display, and a track mark is added. The track number will increase by one. The moved four-second interval plays back repeatedly. 3 Press the jog dial to enter the dividing point. 43