Sony MZ-N910 Help - Page 41
Re-labeling
View all Sony MZ-N910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Functions1) Operations To move the cursor Press VOL -. from the letter input area to the character palette. To move the cursor Press x. from the character palette to the letter input area. To enter a name. Press the jog dial or N for 2 seconds or more. To insert a blank space before the cursor. Press END SEARCH and VOL + at the same time. To delete a letter. Press END SEARCH and VOL - at the same time. To display ":", "-" Press X. or "/" at the input position in the letter input area. To switch capital Press X. and small letters. To cancel labeling. Press x in the letter input area. 1) Functions of the buttons or the control may differ depending on when the cursor is in the letter input area or in the character palette. 7 Repeat step 6, and then enter all characters of the label name. 8 Press the jog dial for 2 seconds or more. A track or disc is labeled. Note When the recording is stopped while labeling a track or a disc during recording, or when the recording moves on to the next track while labeling a track, the input at that point is entered automatically. Re-labeling You can change the label of the disc or a track by doing the procedure for "Labeling a track or a disc (Name)" (page 39). To re-label a track: Start playing the track you want to relabel, and then change the track name while the recorder is playing, or change the track name while the recorder is stopped and the track to be re-labeled is currently selected. To re-label a disc: You can re-label the disc while the recorder is stopped, recording, or playing. To cancel labeling Press x for 2 seconds or more. To return the preceding settings Press x. Notes • The recorder is able to display, but cannot label using Japanese "Katakana" characters. • The recorder cannot rewrite a disc or track name of more than 200 letters that was created by another device. For the remote control operation, see page 65. 41