Sony PCV-L640 Reference Manual - Page 56
drive refer to the instructions that came with your new hard drive.
View all Sony PCV-L640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
42 VAIO Slimtop™ Reference Manual 4 Unplug the ribbon cable and power supply cable from the hard drive connectors. MAN004.VSD 5 Remove the four screws that secure the hard drive to the bottom of the drive carrier. 6 Remove the hard drive from the drive carrier. 7 Set the jumpers on the new hard drive to be the Primary Master IDE drive (refer to the instructions that came with your new hard drive). 8 Insert the new hard drive into the drive carrier. 9 Replace the four screws that secure the drive to the drive carrier. ✍ Be sure you reattach the ground tab at the position shown in the illustration. 10 Reconnect the ribbon cable and power supply cable to the new hard drive. ✍ Be sure to insert the ribbon cable inside the plastic stress-relief slots on the drive carrier.