Sony PDW510 Operation Manual - Page 124
Display Modes and Setting Change Confirmation/Adjustment Progress Messages
View all Sony PDW510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
5 To set another item to "ON" or "OFF", repeat steps 3 and 4. 6 To end the menu operation, set the MENU ON/OFF switch to OFF or close the cover of the menu operating section. 7-2-3 Display Modes and Setting Change Confirmation/ Adjustment Progress Messages You can limit or suppress the messages that give details of setting changes and adjustment progress and results by setting a display mode. The conditions under which messages are displayed and their correspondence with the display mode are as follows: Setting change confirmation/adjustment progress messages and display modes Y: Message is displayed. N: Message is not displayed. Message display condition Message Display mode setting 123 When the filter ND : n, CC : m (where n = N N Y selection has 1, 2, 3, 4, m = A, B, C, D) been changed When the gain GAIN : n (where n = -3dB, N N Y setting has been 0dB, 3dB, 6dB, 9dB,12dB, changed 18dB, 24dB, 30dB, 36dB, 42dB, 48dB) When the setting of the WHITE BAL switch has been changed WHITE : n (where n = A CH, B CH, PRESET) or ATW : RUN NNY When the DCC : ON (or OFF) OUTPUT/DCC selector has been set to DCC ON or OFF NYY When the SS : 1/100 (PDW-510/530) N Y Y shutter speed or 1/60 (PDW-510P/530P) and mode (or 1/125, 1/250, 1/500, setting has been 1/1000, 1/2000,ECS, SLS) changed 1) When the black E.g. WHITE : OK or white balance has been adjusted NYY 1) This is also displayed for about 3 seconds when the SHUTTER selector is set to ON. Changing the display mode The currently set display mode appears on the VF DISP 1 page of the USER menu. To change it, proceed as follows. 1 Follow steps 1 and 2 in 7-2-2 "Selecting the Display Items" on page 123, until the VF DISP 1 page of the USER menu appears on the screen. 2 Turn the MENU knob to move the b mark to "VF DISPLAY MODE", and press the MENU knob. The b mark on the left of "VF DISPLAY MODE" changes to a z mark and the z mark on the left of the setting changes to a ? mark. 3 Turn the MENU knob until the desired display mode appears, and press the MENU knob. The z mark changes to a b mark and the ? mark changes to a z mark. 4 To end the menu operation, set the MENU ON/OFF switch to OFF or close the cover of the menu operating section. 7-2-4 Setting the Marker Display Use the MARKER 1 page of the USER menu to switch the display of the center and safety zone markers on or off and to select whether the area indicated by the safety zone marker is 80%, 90% or 100% of the screen area. MENU knob CANCEL/PRST / ESCAPE switch MENU ON/OFF switch 1 Set the MENU ON/OFF switch to ON. The last accessed menu page appears on the screen. 2 Turn the MENU knob until the MARKER 1 page appears, and press the MENU knob to select the page. Chapter 7 Menu Displays and Detailed Settings 124 7-2 Status Display on the Viewfinder Screen