Sony PDW510 Operation Manual - Page 34
Indicators in the Viewfinder, VDR operation status and status, indicators, Time code display - pdw 510 camcorder manual
View all Sony PDW510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Chapter 2 Locations and Functions of Parts and Controls VDR operation status and status indicators 2-10 Indicators in the Viewfinder Warning display area This shows a message if a recording fault or condensation is detected. For details, see 10-3 "Operation Warnings" on page 174. VDR operation and status indicators on the color LCD Time code display Lights in playback mode. Lights in non-drop frame mode. (PDW-510/530 only) Lights when the camcorder is synchronized with an external time code. Lights when the time code generator is on hold. Lights when the HOLD button is pressed 1) Lights when the time code or real time is displayed. Time counter display: Shows the time code, user bit data, and real time. 1) When the HOLD button is pressed to hold the time code value, the time code is displayed in the format shown below. When the HOLD button is pressed again to release the hold, the time code is displayed in the normal format. Time code display on the color LCD Several indicators are provided above and below the viewfinder screen to indicate the current state and adjustments of the camera. 1 TALLY indicator 2 REC (recording) indicator 3 BATT (battery) indicator Viewfinder screen 4 (warning) indicator 5 Spare indicator 6 SAVE indicator Indicators on the viewfinder a TALLY (green tallly) indicator This indicator lights when the camcorder is in Picture Cash mode. Also, this indicator lights when a green tally signal is received from the camera control unit. b REC (recording, red tally) indicator This indicator lights red when recording starts and remains lit during recording. It also lights when a red tally signal is received from the camera control unit and flashes to give a warning. For details, see 10-3 "Operation Warnings" on page 174. c BATT (battery) indicator This indicator starts flashing when the battery connected to the camcorder is nearly exhausted, and stays lit when the battery is completely exhausted. The battery power level at which the indicator starts flashing can be set on the BATTERY 1 page of the MAINTENANCE menu. For details, refer to the Maintenance Manual. d (warning) indicator This indicator lights when any of the following conditions occurs with the corresponding item set to ON on the "!" LED page of the USER menu. • The gain is set to other than 0 dB. • The SHUTTER selector is set to ON (scan mode I). • The shutter speed is set to a value other than 1/60 (scan mode PsF). 34 2-10 Indicators in the Viewfinder